Thermal Potting Compound Series
Typical Applications:
US-5201 Series is a two-component, silicone-based thermally conductive potting compound. It offers a combination of high thermal conductivity, excellent electrical insulation, broad temperature resistance, low internal stress, aging resistance, and protection against moisture and vibration—making it an ideal solution for the potting and protection of various electronic components.
To request a sample of our Thermal Potting Compounds about more product information, please email us at tina@u-sheen.com or request a product sample.
Product Description
◆ Excellent thermal conductivity, available in options ranging from 1.0 to 3.5 W/m·K.
◆ Minimum interface thickness can reach as low as 0.15 mm.
◆ Complies with RoHS, Halogen-Free, and REACH environmental and safety standards.
【Applications】
◆ High-power power modules
◆ Power management systems for new energy vehicles
◆ DC-DC converters
◆ Power modules for charging piles
Properties
| Product Type | US-5201-10 | US-5201-15 | US-5201-20 | US-5201-30 | US-5201-35 | Test Standard |
| Color | A:White B:Gray | A:White B:Gray | A:White B:Gray | A:White B:Gray | A:White B:Gray | Visual |
| Density (g/cm³) | 1.8±0.2 | 2.0±0.2 | 2.5±0.2 | 2.9±0.2 | 3.1±0.1 | ASTM D792 |
| Viscosity (Cps) | A:5000~5000 B:5000~8000 | A:4000~7000 B:6000~9000 | A:5000~7000 B:9000~12000 | A:11000~15000 B:11000~15000 | A:24000~25000 B:24000~25000 | GB/T 2794-1995 |
| Minimum interface thickness (mm) | 0.15 | 0.15 | 0.1 | 0.15 | 0.15 | / |
| Thermal conductivity (W/m·K) | 1.0±0.1 | 1.5±0.15 | 2.0±0.2 | 3.0±0.3 | 3.5 | ASTM D5470 |
| Breakdown voltage (KV,@AC) | ≥ 10 | ≥ 10 | ≥ 10 | ≥ 10 | ≥ 5 | ASTM D149 |
| Volume resistivity (Ω·cm, @250V) | ≥ 10¹² | ≥ 10¹² | ≥ 10¹² | ≥ 10¹² | ≥ 10¹⁴ | ASTM D257 |
| Application temperature (℃) | -40~150 | -40~150 | -40~150 | -40~150 | -40~150 | / |
| Tack-free time @25℃ (Min) | ≥ 60 | ≥ 60 | ≥ 60 | ≥ 60 | ≥ 60 | / |
| Hardness after curing (Shore 00) | 60~80 | 60~80 | 60~80 | 60~80 | 60±5 | ASTM D2240 |
| Flammability | V-0 | V-0 | V-0 | V-0 | V-0 | UL94 |
| RoHS | PASS | PASS | PASS | PASS | PASS | IEC 62321 |
| Halogen | PASS | PASS | PASS | PASS | PASS | EN 14582 |
| REACH | PASS | PASS | PASS | PASS | PASS | EN 14372 |
【Instructions for Use】
Weighing: Accurately weigh Component A and Component B,then mix them thoroughly at a 1:1 (mass) ratio. Before weighing,stir Component A and Component B separately to disperse any settled fillers evenly into the adhesive, so as not to affect the performance of the colloid.
Mixing: Mix the adhesive thoroughly by hand or machine until it achieves a uniform color. For manual potting, avoid preparing an excessive amount of adhesive at one time, as reduced fluidity later may make potting difficult.
Degassing: Place the uniformly mixed adhesive in a vacuum chamber for degassing. Remove air trapped during mixing by applying a vacuum, with a vacuum level of 0.08–0.10 Mpa.
Potting: Pour the degassed adhesive into the device to complete the potting process. Ensure the device surface and mixing container are clean and dry before potting.
Curing: Cure the potted device at room temperature. The viscosity of the mixed colloid increases over time, so ensure potting is completed within the operable time window.
【Storage & Transportation】
It is recommended to store in a dry place at a temperature of 5–25℃ with the lid tightly sealed. Keep away from open flames. This product is non-toxic and should be stored and transported as a non-hazardous material.
【Packaging】
Customized packaging method.
【Shelf Life】
6 months
About Us
Dongguan Sheen Electronic Technology Co., Ltd.
◆ Founded: 2008
◆ Team: 200 employees
◆ Facility: 20,000㎡
◆ Focus: R&D and production of functional materials
◆ Strengths: Efficient, collaborative team
◆ Achievements: Key supplier to leading global manufacturers
◆ Applications: Telecom, Automotive, Medical, Computing, Industrial , Military
◆ Certifications: ISO9001:2015, ISO14001:2015, IATF16949:2016

Partners

Certifications
Videos
INQUIRY
Our business is global. Please allow up to 3 business days to connect you to the appropriate regional representative.
* indicates required fields