English
usheenthermal
The thermal conductive phase change material is a heat-enhancing polymer designed to minimize the thermal resistance between the consumable electronic device and its connection.
The thermal gel is a silicone resin as a base material, and the thermally conductive filler and bonding material are configured in a certain proportion.
Sheen thermal conductive silicone sheet has a thermal conductivity of 1.0-10W and a thickness of 0.15-1.0mm, which meets the heat dissipation requirements of surveillance cameras of various sizes of power security equipment.
Thermally conductive material is a new type of industrial material.
Thermally conductive gels are widely used in LEDs, microprocessors, memory modules, cache memories, sealed integrated chips, DC / DC converters, IGBTs and other power modules, power semiconductors, solid-state relays, and bridge rectifiers.
Sheen has prepared the following thermal conductive materials plans for 5G
Heat pipes and VCs are usually used with radiators. Its key role is to reduce the thermal resistance of diffusion.
Traditional thermally conductive silicone pads will deposit silicone oil at room temperature for a long time. Therefore, non-silicon thermally conductive pads replace traditional silicone thermal pads on high-end medical equipment such as precision optics and LEDs.
Thermally conductive material is a new type of industrial material.
the graphite thermal conductive film thermal pad is very suitable for efficiently transferring the heat generated by the heat source in a small space.
The thermal conductivity pads, insulating and thermal materials uses a silicon rubber base material, and ceramic particles such as boron nitride and alumina are used as fillers, and the heat conducting effect is very good
The thermal conductive silicone film is specially produced for the planning scheme of heat transfer through the gap